AUTO FINESSE Iron Out Rust Remover 500 ml

Auto Finesse Iron Out Contamination Remover 500ml is the most effective, fast-acting rust and brake dust remover on the market, now with a new hardened sprayer.

Auto Finesse Iron Out Removers are one of the best products in the automotive industry in recent years. Auto Finesse Iron Out intensively decontaminates your vehicle of rust build-up and brake dust before these parts cause serious damage. Brake dust and iron residue is a major problem due to increasing mass transit and increased traffic levels. These tiny bits of iron shards can embed themselves into virtually any surface, and if left unaddressed, they will begin to corrode and thus erode the surfaces in question. Auto Finesse Iron Out specifically dissolves these pieces before the damage to your vehicle begins to show.

Auto Finesse Iron is an advanced, pH neutral, reactive gel formula that specifically targets only iron based contamination. Unlike aggressive acids, it is often used to remove iron particles - fly rust. It is suitable for use on all exterior surfaces including paint, aluminum, magnesium, stainless steel, anodized surfaces, chrome, glass, plastic, and even rubber surfaces. Iron also contains powerful degreasing agents to help loosen the road film, making it a suitable choice for the decontamination process.

Unlike other standard cleaners, Iron Out is enriched with agents to prevent the subsequent attachment of contaminants to the surface. The resulting effect is a much slower soiling of the wheel or body surface.

A luxury option for cleaning heavily soiled wheels!

Application procedure and wheels:
1) Make sure the surface is cool and dry before application.
2) Make sure the surface is cool and dry before application.) Apply a fine mist to the surface and leave on.
3) The effectiveness of the product is shown by a distinctive purple discolouration, up to black in case of heavy soiling.
4) Leave on until the product dries, then rinse with a pressure washer.
5) In the case of a surface that is really heavily soiled, use a detailing brush to help with the product (no need for scrubbing with a brush or other rough accessories.
PS. don't forget to clean the brake calipers. Iron Out can handle baked on dust here too...

Bodywork application procedure:
1) Wash the car to remove all classic dirt.
2) Make sure the surface is cool and dry before application.
3) Wash the car to remove all classic dirt. 3) Make sure the surface is cool and dry before application.) Apply a fine mist to the surface and leave to work.
4) The effectiveness of the product is shown by a distinctive purple discolouration.
5) Leave to work until the product dries, then rinse with a pressure washer. Do not use any cloths or brushes when applying to the bodywork.
6) If the bodywork is heavily affected by flaking rust, start washing the car directly with a pH neutral shampoo without rinsing.
7) Then rinse with the shampoo.